top of page
Hertz HCP4M
SKU HCP 4M
Price
$429.99
Marine 4 Channel Amplifier 95 WRMS X 4 at 2 Ch: 4 - 3 - 2 760 WHCP 4M four channels marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to...
Quantity
Buyer's Guide
Ch: 4 - 3 - 2 | 760 W HCP 4M four channels marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. The HCP 4 M fourchannel model features also an extended frequency range filter, which can be used when designing active 2-way speaker systems. SPECS INPUT/OUTPUT TECHNOLOGIES DOWNLOADS General Specs Channels 4 - 3 - 2 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A ldling current (power ON/OFF): 1 A / 0.04 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 21 A Remote In: 7 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-OniOff with Speaker-ln AMPLIFIER STAGE Distorsion - TliD (100Hz @ 4Ω): 0.01% Bandwidth: 10 ÷ 45 kHz S/N Ratlo (A welghted @ 1 V): 103 dB Damping factor (100Hz @ 4Ω) 120 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Speaker-ln sensitivity: 0.8 ÷ 20 VRMS Load impedance (MIN) @4Ch: @3Ch: @2Ch: 2 Ω + 2 Ω + 4 Ω 2 Ω 4 Ω Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 4Ch 55 W x 4 (4Ω) 4Ch 85 W x 4 (2Ω) 3Ch 55 W x 2 (4Ω) + 170 W x 1 (4Ω) 3Ch 85 W x 2 (2Ω) + 170 W x 1 (4Ω) 2Ch 170 W x 2 (4Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10% 4Ch 65 W x 4 (4Ω) 4Ch 95 W x 4 (2Ω) 3Ch 65 W x 2 (4Ω) + 190 W x 1 (4Ω) 3Ch 95 W x 2 (2Ω) + 190 W x 1 (4Ω) 2Ch 190 W x 2 (4Ω) CEA 2006-A RATINGS RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): 50 W x 4 Ch S/N Ratio (ref. 1 W output) 82 dBA Total Power RMS 760 W INPUTS / FILTERS lnputs: PRE IN / SPEAKER IN Pre Out FULL range (FRONT) Yes FRONT Ch. filters FULL: Yes Hi-Pass: 80 Hz @ 12 dB/Oct Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct REAR Ch. filters FULL: Yes Hi-Pass: 80 Hz @ 12 dB/Oct Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct FRONT Ch. MONO (on/off): Yes REAR Ch. MONO (on/off): Yes BOOST 50 Hz (adjust): (0 / 6 / 12) dB Physical Specs Max size (mm/in): 315 x 190 x 50 12.40 x 7.48 x 1.97 Weight (kg/lb): 2.62 (5.77)
bottom of page